R9DS RC Receiver 9 Channels Flight Information Transmission SBUS/PWM/PPM Signal Compatible with AT9 AT9S AT10II AT10 - (Color: R9DS)

R9DS 2.4Ghz 9/10 Channels Receiver Flight Information Transmission RX Works with AT9S/AT9S Pro/AT9/AT10II/AT10Features:Excellent Anti-interference: with DSSS&FHSS pseudo random algorithm to give R9DS with excellent anti-interference ability.9/10 Channels: Support PWM/SBUS signal output, works with AT9/AT9S/AT9S Pro/AT10/AT10II. Please make sure SYSTEM channel selection is 10CH mode when it works with AT10II 12 channels transmitter, otherwise that will cannot works.Fast Response: High resolution ratio of 4096, the stability of 0.5us, to provide a quicker, low-latency connection for the driver.Long Range Control: Outstanding control range up to 2.1 miles in air. (Actually control range depends on the using environment)Quick to Bind and Anti-polarity Protection: No need any setting on transmitter when R9DS bind with radio. With reverse polarity protection circuit, not damage the receiver even you plug wrong polarity.Please note:1.R9DS only work with transmitter products: AT9S/AT9S Pro/AT9/AT10II/AT102.Short push the ID set switch two times within 1 second it can change signal, while the LED change to red, it indicates PWM signal output, the blue/purple LED indicates SBUS signal output.3.Red light--9 channels PWM signal output. Blue light--10 channels SBUS and PMW signal output at the same time.How to Match Code With Transmitter:1. Place the transmitter and the receiver close to each other within 1 meter.2. Turn on the transmitter, then power on the R9DS.3. Connect CH3 of R9DS to ESC.4.There is a black button on the R9DS, use a thin stick or pen press the binding button in one second until the receiver light starts blinking and release, after about 8 times blinking,match code success when receiver signal LED always on.SBUS and PWM signal change：Short press the ID SET switch two times within 1 second, the signal is changed from norma

• Color: R9DS
• Excellent Anti-interference: with DSSS&FHSS pseudo random algorithm to give R9DS with excellent anti-interference ability.
• 9/10 Channels: Support PWM/SBUS signal output, works with AT9/AT9S/AT9S Pro/AT10/AT10II. Please make sure SYSTEM channel selection is 10CH mode when it works with AT10II 12 channels transmitter, otherwise that will cannot works.
• Fast Response: High resolution ratio of 4096, the stability of 0.5us, to provide a quicker, low-latency connection for the driver.
• Long Range Control: Outstanding control range up to 2.1 miles in air. (Actually control range depends on the using environment)