LaserLine Direct ELEVATION Cut/Fill LENKER Grade Rod For Laser Level

The LaserLine Elevation cut/fill rods is rugged, versatile, and lightweight. The tape has bold numbers and easy to distinguish cut/fill portions. With DuPont nylon parts, heavy duty matte tape, and U.V. Stabilized detector rails, you are sure to get a long life out of this piece of equipment. Direct reading, or true Elevation (also known as lenker style) is a Grade rod with a moveable tape face allowing you to set the actual benchmark Elevation, or any elevation, above or below the bench into the rod. The actual true Elevation above sea level is read on these rods, thus eliminating errors caused by adding or subtracting. Since no math is involved, grade shots are much faster than conventional style rods. On most jobsites, the bench Elevation is typically established by survey, and all elevations on that project are above that or below primary bench Elevation. For use with a laser detector. There is a special rail slide and LaserLine detector bracket that lets the laser detector travel the full working length of the rod (with an optional bracket) This allows faster and easier readings because it takes the awkwardness out of having to loosen the detector, move the detector, then tighten the detector for each reading.

• This rod does not come with a Detector bracket. They are sold separately.
• Lightweight
• The tape has bold numbers and easy to distinguish cut/fill portions
• Dupont nylon Parts, heavy duty matte tape, and U.V. Stabilized Detector rails