KLUFO Adjustable Pulse Spot Welder Jewelry Gold Butt Welding Machine 60A 600W

Package listing: Welder Foot Pedal 1PC Cable 1PC Forceps Clamp 1PC Tungsten Needle 1PC Specifications: Power supply:110V 50HZ/60HZ Power:600W Ampere for welding:0.560A,Continuous adjustable(Fluctuation) Weight:8kg Size:300*170*220mm Instructions: 1. Before using the welder, first check if the power supply meets the operating voltage. 2. Connect the corresponding output of the welder to the corresponding polarity of the screw (tighten the nut when the output wire is connected to the output pole). 3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle. The distance depends on the size and shape of the workpiece. Generally, the distance between the tungsten needle and the workpiece is between 0.5-1 mm. After the welding position is fixed, the point is The foot switch is used to weld the workpiece to a high temperature arc between the workpiece and the tungsten needle. 4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.

• 【Welding Dimensions】 Argon hand-held welding machine, argon protection, no black spots on the welding ring, gold and silver Stainless steel Titanium can be spot welded, can weld 0.5-2.5mm weldments, and can adjust the power of the machine according to the size of the cargo.
• 【Application】 The welding machine can be used for rapid welding of platinum, gold, K gold and silver steel, and for the tight welding of the ring, the melon button and the thin wire. It can be protected by argon gas. It can be directly soldered without solder powder. The solder joints are smooth and not black.
• 【Working Principle】 Using the principle of plasma high-frequency discharge, the molten pool is formed in the metal welding joint, and the different output power is adjusted according to the different wires. The welded workpiece is smooth and firm, and the welding speed is fast and the efficiency is high.
• 【Diversity】 Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements to achieve the desired effect.
• 【Current Adjustable】 When the potentiometer is rotated clockwise (coarse adjustment, fine adjustment), the output pulse current increases, otherwise the output pulse current decreases.