FYSETC Janusbps Buildplate Platform-Textured PEI+PET-CF Sheet Double-Sided Removable Spring Steel Plate and Sticker Bottom 300x300mm for TAZWorkhores TAZ-Pro Series

What's in the box? 1x 300x300mm/11.8 inch + 1x sticker bottom. Easy to install and high temperature resistant. If for better adhesion, you can slightly sand it with the sandpapers. Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.

• Excellent double-sided PEI Powder + PET-CF Coating spring steel build plate design. This 300x300mm/11.8x11.8inch Plate kit includes 2 part, a flexible spring steel plate and a soft bottom sheet with strong back adhesive.
• Double-sided Build Plate is One side textured pei powder(Gold) + another coated PET-Carbonfiber sheet, gives you two Different experiences on one plate just by flipping it over. The matte texture makes it easier for the printing material to adhere to the surface, especailly for ABS. So does the new side. It leaves a smooth finish inside with the beautiful-texture finish. The PET-CF surface has grids to help observe nozzle positioning easily.
• No glue, No tap, Compatible with various kinds of filaments, such as PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD etc. The adaptation temperature of different materials is different, please adjust it reasonably. Reference bed temperature: PLA(50-65℃), PETG(70-80), TPU(60-70), ABS(90-100, recommend on the Gold side). Note: Please keep nozzle not directly touch to avoid scratch or permization.
• Size: 300x300mm/11.8 inch, compatible with LullzBot TAZWorkhorse, TAZ-Pro, TAZ-6, TAZ-5, TAZ-4, TAZ-3, may fit Ant A8 plus, et5 and et5 pro. Please re-measure your hoted bed before ordering, not rely the machine's build volume which is smaller than that of the bed.
• Made of high quality stainless steel, Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Textured PEI Powder side can easily handle temperatures up to 190°C and Carbonfiber side can work with temperature up to 100℃. It's easy to remove the printed matter from the platform by bending slightly. Through hundreds of experimental tests, repeated use is still as new.