Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbor

From the Manufacturer Forrest WW10407125 Woodworker II 10-Inch 40 Tooth ATB .125 Kerf Saw Blade with 5/8-Inch Arbors offers a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blade runs very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and re-straightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind its' blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. Forrest Woodworker 1 Saw Blade For Radial and Table Saws. These trim and cross-cut ALL PURPOSE blades give scratch-free POLISHED cuts on wood, RIP or CROSSCUT, up to 2-inches thick. They have a 30-degree Alternate Top Bevel with a 5-degree Face Hook on 10-inch diameters and smaller.

• This kerf saw saves 1/8" on wood loss for each cut.
• Feeds easily when used for moderate rips and crosscuts on a table saw
• Reduces jump in for better pull control
• Eliminates bottom splintering on radial crosscuts
• The new 30-degree ATB tooth style stops the blade totally
• This kerf saw saves 1/3 on wood loss for each cut
• Feeds easily when used for moderate rips and crosscuts on a table saw
• Reduces jump in for better pull control
• Eliminates bottom splintering on radial crosscuts
• The new 30-degree ATB tooth style stops the blade totally