Limited Time Sale$31.80 cheaper than the new price!!
| Management number | 211056939 | Release Date | 2026/04/04 | List Price | $21.20 | Model Number | 211056939 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Feature: 1, MOC3043 Phototriac and BTA12-600B triac (the heatsink is electrically insulated). 2, Input Action Voltage DC 3 to 32V. LED indication for each channel. Anti-reverse protection diode. 3, Output Load Voltage range AC 100 to 240V (50/60Hz). Maximum on-state average current: 12 Amp. Isolation: Phototriac. Zero cross: Yes. 4, Dual input terminal block, you can flexibility to configure the input control mode: Individual / Common Positive / Common Negative. 5, DIN rail mount, Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass PCB, dual copper layers. Characteristic Parameters: Input Signal Control Terminal: Action Voltage: 3 ~ 32 VDC. Current: 6mA at 5VDC, 8mA at 12VDC, 11mA at 24VDC, 13mA at 32VDC. Turn off voltage: 0 ~ 0.8 VDC. In-Out isolation surge voltage: 7500V. Output Terminal: Load voltage range: 100 to 240 VAC (50/60Hz). Max. on-state average current: 12 Amp. Non repetitive surge peak on-state current: 120 Amp (<20mS). Max. on-state voltage drop: 1.5V. Max. off-state current: <2mA / at 220VAC. Off-state max. allow voltage: 400V. Isolation: Phototriac. Zero cross: Yes. Load type: General purpose. Input terminal block: Wire range: 24 ~ 12 AWG / 2.5mm square. Strip length: 7mm. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass. Output(load) terminal block: Wire range 26AWG ~ 10AWG / 4mm square, Strip length 8mm, Screws - M3, steel, Cr3+ Zn plated. Pin header and Cage - Brass.
| Item Weight | 12.6 ounces |
|---|---|
| Manufacturer | Electronics-Salon |
| Item model number | MD-D1304T Series |
| Package Dimensions | 6.89 x 3.78 x 2.99 inches |
| Is Discontinued By Manufacturer | No |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form