Limited Time Sale$35.89 cheaper than the new price!!
| Management number | 210006656 | Release Date | 2026/04/02 | List Price | $23.92 | Model Number | 210006656 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Brushless DC motor used in the car vacuum cleaner, this motor was originally used in rechargeable vacuum cleaners, the workmanship is very good, the motor built-in high-power brushless drive, the measured speed is about 47,000 rpm, the motor rotor and impeller are doing dynamic balance, with imported *** bearings, impellers are aluminum alloy material, fan into the diameter 21mm.The box motor has a test report, the measured maximum air volume is 1m ³ per minute, the full blocking vacuum degree is 7300pa, and the noise is 85dB, for reference only.The rated voltage of the motor is 10.8V and the power is 85W. It should have been powered by a 3S power. The measured limit voltage of 8-15V can be used. The maximum current of the motor is about 6-7A at 8-15V. The motor supports 1kHz PWM signal stepless speed regulation. For details, see the introduction wiring The thick line of the motor is red positive, and the thick line of the motor is black negative. Be sure to confirm the positive and negative electrodes and then connect them. Wrong connection will burn the drive circuit.The fan should not directly absorb foreign matter or water into the impeller, otherwise it will damage the motor.The motor is a high-power brushless motor, so the power supply must have a large current. It is recommended that the power supply be at least 10A or larger. need high-current power cells. The motor is suitable for modifying portable vacuum cleaners or large-flow disinfection atomization sprayers.The motor weighs about 192 grams.If you need PWM stepless speed regulationOrigin : Mainland ChinaModel Number : DC12V85Witem number : LS3415008J
| Item Weight | 1.76 ounces |
|---|---|
| Manufacturer | Pinnengdianshang |
| Package Dimensions | 0.39 x 0.39 x 0.39 inches |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form