3Pack 0.2+0.4+0.6MM Upgrade Ceramic Hotend for Elegoo Centauri Carbon, Thermal Efficiency Increased by 15%, with 0.8MM Bimetallic Hardened Steel Nozzle Brush Silicone Socks and Kit Tools

Ceramic Hotend for Elegoo Centauri Carbon with 0.2/0.4/0.6MM Bimetallic Hardened Steel nozzlepackage includes:0.2MM Ceramic Hotend Kit x1 (The hot end kit has been pre assembled)0.4MM Ceramic Hotend Kit x10.6MM Ceramic Hotend Kit x10.8MM Bimetallic Hardened Steel nozzle x1silicone sleeve x3nozzle brush x3Kit Tools x1

• Compatibility: 3-pack 0.2/0.4/0.6MM for Elegoo Centauri Carbon hotend kit pre-assembled (includes hardened steel bimetallic nozzle, heating block, ceramic heating element, thermistor, heat sink, silicone sleeve). you can easily replace the entire old hot end without disassembling it separately. please confirm your 3D printer model before purchasing
• Application: When your for Centauri Carbon Ceramic Hotend frequently plugs, extrusion flow fluctuates, leaks, or temperature calibration fails, it may be caused by poor heat dissipation of the throat tube, aging of the heating block or thermistor failure, and thermistor needs to be replaced as a whole to avoid affecting printing stability
• Upgraded Version: for Centauri Carbon hot end uses ceramic heating plate and oxide coating heat sink, it can reach the working temperature in a short time, greatly shortening the preheating waiting time. the high temperature resistance effectively ensures the stability of high temperature printing. high temperature oxidation process improves heat radiation efficiency by 15% compared to non-oxidation heat sinks
• You Will Receive: 1Pc 0.2MM Hotend kit / 1Pc 0.4MM Hotend kit / 1Pc 0.6MM Hotend kit(pre-assembled hardened steel bimetallic nozzle), 1pc 0.8MM hardened steel bimetallic nozzle, 3pcs silicone sleeves and nozzle brushes, and 1 set of removal tools. a variety of nozzle sizes are perfect for switching between fine details and fast batch printing for DIY fun. If you have any questions, please leave a message on Amazon
• Notice: 1. Please turn off the power supply and make sure the hot end cools to room temperature before replacing to avoid burns at high temperature. 2. check that the received for Elegoo Carbon hotend print head extruder kit is tight, as looseness may occur during delivery. 3. after replacement, please recalibrate the parameters, keep the bed in level and do a test print